Your DELTER coffee brewer uses some simple yet high tech components all in the effort to brew fresh, consistent and tasty coffee.

Follow along with the video or guide below.

1. First, Always use fresh coffee

2. Grind 12 grams of fresh coffee beans to a medium too fine coarseness. Ideally finer then french press yet coarser then espresso.

3. Place the filter and brewer lid onto the cup.

4. Rinse the filter with water then dispose of the rinsed water.

5. Gently Insert the plunger into the brew chamber. Ensure it is completely in the bottom position.

6. Add your coffee to the coffee chamber. Do not place the coffee into the cap as it will not screw on correctly and seal.

7. Screw the cap on until it is firmly tightened, you may feel a stop which means it is correctly sealed.

8. Flip the delter over and place it over your cup.

9. Remove the Rubber Plunger Lid

10. Using your kettle Screw the cap on until it is firmly tightened, (we reccomend water be apx 95* celcious) begin brewing by pouring the hot water into the chamber.

11. Fill to the 200ml Line.

12. Firmly holding the brewer place the rubber cap back onto the chamber, Ensuring it is correctly placed so water can not leak.

13. Raise the plunger gently until l the water reaches the 50ml indicator.

14. Gently press down on the chamber to begin the brew. (A gentle press improoves the results)

15. Once the first infusion is complete, raise the plunger up to the 100ml indicator and repeat 14.

16. Finally, Raise the plunger again up to the 100ml line and compete the brewing process by gently pressing the coffee & air through the filter.

Enjoy Great Coffee With the DELTER Brewer.

For more information or demos visit us in-store or phone 1300 650 091.